Mamba parts...
Where possible, I've chosen to use materials that you should be able to find at any kite shop. This page is a list of the specifications for each part in your kite.
These charts only reflect the latest specifications for each model. Check carefully that the part I list is the same for your kite. If you don't see exactly what you need, or have any questions, send me a note at ken@bluemoonkites.com or call 828-221-0593
The full range of finished replacement parts, as well as unfinished tubes and fittings, is available.
| Mamba Std. Parts | |
|---|---|
| Description | Specifications |
| Spine | SkyShark P300 @ 31.5" |
| Spine Extension | .240 @ 6.0" w/fittings |
| Upper Leading Edge (std.) | SkyShark P2X @ 32.5" 2 |
| Lower Leading Edge (std.) | SkyShark P2X @ 32.5" 2 |
| Lower Spreader | SkyShark 5PT @ 32.0" 3 |
| Upper Spreader | .220 pultruded @ 21.5" |
| ULE Fittings (pair) | APA Ca |
| LLE Fittings (pair) | APA Ca |
| LLE Nocks (pair) | lock nocks |
| T Ferrule | .240 solid x 4.0" |
| Stand-offs inner (pair) | 3mm carbon rod @ 8.25" 1 |
| Stand-offs middle (pair) | 3mm carbon rod @ 11.0" 1 |
| Stand-offs outer (pair) | 1.5mm FG rod @ 7.75" 1 |
| Mamba UL parts... | |
|---|---|
| Description | Specifications |
| Mamba Bridle | Mamba bridle |
| Spine | SkyShark P200 @ 31.5" |
| Spine Extension | .240 w/fittings |
| Upper Leading Edge | SkyShark 3PT @ 32.5" |
| Lower Leading Edge | SkyShark 3PT @ 32.5" |
| Lower Spreader | SkyShark 3PT BD @ 32.0" 3 |
| Upper Spreader | .157 pultruded @ 21.5" |
| ULE Fittings (2) | TAPA custom |
| LLE Fittings (2) | TAPA custom |
| LLE Nocks (pair) | .230 safety nocks |
| T Ferrule | .240 solid x 4.0" |
| Stand-offs inner (pair) | 3mm carbon rod @ 8 7/8" 1 |
| Stand-offs middle (pair) | 3mm carbon rod @ 10 1/4" 1 |
| Stand-offs outer (pair) | 1.5mm FG rod @ 7 3/4" 1 |
| Mamba Nitro & V2 Parts | |
|---|---|
| Description | Specifications |
| Mamba Bridle | Mamba bridle |
| Spine | SkyShark P300 @ 31.5" |
| Spine Extension | .240 w/fittings |
| Upper Leading Edge (std.) | SkyShark Nitro @ 32.5" 2 |
| Lower Leading Edge (std.) | SkyShark Nitro @ 32.5" 2 |
| Lower Spreader | SkyShark 5PT BD @ 32.0" 3 |
| Upper Spreader | .220 pultruded @ 21.5" |
| ULE Fittings (pair) | APA Ca |
| LLE Fittings (pair) | APA Ca |
| LLE Nocks (pair) | .254 safety nocks |
| T Ferrule | .240 solid x 4.0" |
| Stand-offs inner (pair) | 3mm carbon rod @ 8.25" 1 |
| Stand-offs middle (pair) | 3mm carbon rod @ 11.0" 1 |
| Stand-offs outer (pair) | 2mm FG rod @ 7.75" 1 |
1 posted standoff dimensions are the length of the rod only, not the finished part.
2 Nitro tubes can be cut at either end. I always cut them at the big end to customize the flex profile to the kite.
3 "PT" series tapered tubes should always be cut at the smaller end.